The washing machine is developed by simulating the principle of manual rubbing of clothes. It is powered by an electric motor and washes clothes by rubbing, tumbling, scouring, and other mechanical effects, plus the surface chemistry of the washing liquid to remove the dirt attached to the clothes, thus achieving the purpose of washing clothes. But the best washing machine is important to maintain.
• Maintenance of washing machine
• Descaling matters of washing machine
• Washing machine cleaning
Washing machine maintenance
To have the best washing machine, proper lubrication and maintenance must be carried out carefully and on time. The main place where the washing machineneeds to be lubricated is the bearings and gears. The bearings need to be injected with anti-wear and anti-oxidation stability good L-TSA22 anti-rust and anti-oxidation lubricant by the oil injection hole, which is generally refueled once every 2-3 years. If general mechanical oil is used, it needs to be refueled once a year. The gears should be lubricated with No.2 extreme pressure lithium grease with good adhesion, or good oil, plus zinc dialkyl dithiophosphate with a mass fraction of 1%, or MoS2 with a mass fraction of 3%, L-CKC100 medium extreme pressure anti-wear gear oil. The dryer’s bearings and gears should be lubricated by adding anti-oxidation, anti-rust, and anti-wear L-AN15 and L-AN68 lubricants with good anti-oxidation, anti-rust, and anti-wear properties every year or half a year. Sealed rolling bearings should be filled by the bearing factory into a service life of more than 1000 hours, polyurea-based thickened refined petroleum lubricant with anti-rust and anti-oxidant grease No. 2.
Washing machine descaling matters
The inside of the washing machine looks very clean, but there is an outer sleeve on the outside of the washing drum, and there will be dirt in the middle. Its dirt mainly consists of limescale, laundry detergent-free matter, fibers, organic substances, dust, bacteria, and other garbage, which will firmly adhere to the washing machine sandwich inside, reproduce and ferment at room temperature, and laundry will contaminate clothes. When cleaning, pour the three-kettle dosage of water with a descaling agent into an empty container, prepare it in proportion and mix it well. Pour the mixed descaling agent solution from the detergent-adding box. Then press the power switch of the washing machine, set it to the longest time "washing program" and make the washing drum rotate. After the descaling solution is discharged from the drain pipe into the drum, add the discharged descaling solution from the detergent dispenser, and so on several times until the program is finished, then open the filter to clean the filter. When the machine is finished running, open the water inlet valve and return the drain to its original position. Re-select the washing program, make the machine run again, and when the program is finished running, clean the filter again. At this point, the descaling and cleaning are complete.
Washing machine cleaning
Usually, people only know that washing machines are used for washing machines, but the vast majority of people are unaware that washing machines also need to be cleaned. In recent years, people have become increasingly important to healthy living, which is to wash dirty clothes by washing machines but the more dirty, leading people to focus on washing machine cleaning problems. One is to ask professional maintenance workers to dismantle the washing machine trough for cleaning, this way higher cost is also more trouble. The other is to use a professional high rate of bacteria removal washing machine tank cleaner for cleaning, decontamination, and bacteria removal in one step, the operation is simple and effective.
The best washing machines also need to be maintained and cleaned, and regular maintenance is required to give the user the best results. If you are interested in our washing machine, you can check our company website: https://www.feilongelectric.com/, we are looking forward to your visit.
