Publish Time: 2024-01-31 Origin: Site
In addition to learning to choose a reliable chest freezer, it is also important for customers to consider how to use it properly. The following are the precautions related to our chest freezer.
Handling precautions
Placement precautions
Precautions for use
1, When handling the chest freezer, you should lift the bottom foot, not grab the door handle or force it on the table and condenser, and not drag it on the ground.
2, The maximum tilt angle of the box should not exceed 45 degrees, not to mention inverted, otherwise, it will damage the compressor or make the refrigerant oil in the compressor flow into the refrigeration pipeline, affecting the refrigeration, and even cause the compressor offspring.
3, During transportation, to prevent bumping and violent vibration, to prevent rain and water immersion.
1, Chest freezer should be placed away from heat sources, and not subject to direct sunlight, because its work requires heat exchange with the outside world, through the condenser to the outside world heat dissipation, the higher the outside ambient temperature, the slower heat dissipation, which will make the chest freezer work longer, increasing power consumption, poor refrigeration effect.
2, Should be placed in places with low humidity, because the chest freezer shell, condenser, and compressor are metal materials, if the air humidity is too large, will make these parts rust, and shorten the service life of the electric chest freezer. At the same time, a humid overheating environment will cause the chest freezer surface condensation, affecting the electrical performance.
3, Should be placed in a well-ventilated place, if the chest freezer around the pile of debris, or too close to the wall, is not conducive to heat dissipation, will affect the cooling effect. chest freezer top surface should be left with at least 30CM height of space, and the back and sides of the surface should be left with at least 10CM of space, for heat dissipation.
4, Should be placed on flat and solid ground, and make the compressor maintain the level. This is not only for the need of safety but also can make the compressor work smoothly and reduce vibration and noise.
5, Should not be placed in places where the temperature is too low. Because the temperature is too low, the compressor starts having difficulty, so the freezer refrigeration is poor, and can not be overcome, chest freezer can open the freezer temperature compensation switch.
6, Should not be placed in the flammable, explosive, and corrosive substances in the environment, while the internal do not place such items.
7, Do not place heavy objects on the top of the chest freezer to prevent objects from falling due to the switch so that people are injured.
1, Read the product manual in detail and use it according to the requirements of the manual.
2, Check whether the power supply voltage meets the requirements.
3, Do not damage the insulation layer of the power cord, do not overpress the wire, and do not change or lengthen the power cord at will.
4, Chest freezer in the storage of food before running idle for some time, and so the box temperature is reduced, and then put the food, storage of food can not be too much, try to avoid refrigerators, freezers work for a long time full load.
Our factory is world class and our quality control system follows the quality control system of the world's largest automobile manufacturer to ensure excellent quality management and production system. We are focused on beating, and improving and will soon lead the refrigeration industry with several production and design patents for current innovations. Above are the notes related to our chest freezer. if you are interested in the product, you can contact us, our website is https://www.feilongelectric.com/.We are looking forward to your arrival and sincerely hope to cooperate with you.